304 intake manifold talk setting

[Steve Spraggs]

Hi all I’m replacing the intake gasket I’m after talk setting and order to titan the bolts in
Thanks

 

[Slowvxss]

35-40 Nm

 

[MikeC]

Gregory's says:
Initial setting- Finger tight
Second setting- 12 to 17 Nm
Third setting- 34 to 41 Nm

 

[shane_3800]

tell it to shut up if it wants to torque shi t

 

[Steve Spraggs]

Gregory's says:
Initial setting- Finger tight
Second setting- 12 to 17 Nm
Third setting- 34 to 41 Nm

Thanks dude is there any particular order to do them up

 

[shane_3800]

Thanks dude is there any particular order to do them up

Start from the centre zig zag side to side as you go out to the edges. Repeat the first setting until the centre bolts stop moving then do the same for the second setting.

 

[MikeC]

Thanks dude is there any particular order to do them up

The pattern shown in VXSS's photo.

 

[someguy360]

If your manifolds talking you have other problems