Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

5ltr dizzy - quick question

Not_An_Abba_Fan

Exhaust Guru
Joined
Aug 18, 2006
Messages
14,410
Reaction score
937
Points
113
Location
Bunbury, WA
Members Ride
Strange Rover
It's either 1/2" or 9/16", I'm pretty sure it's 1/2".
 

Not_An_Abba_Fan

Exhaust Guru
Joined
Aug 18, 2006
Messages
14,410
Reaction score
937
Points
113
Location
Bunbury, WA
Members Ride
Strange Rover
It's definitely not 5/16", that is the same as 8mm. If I was at home I could check. It must be 9/16" then.
 

Not_An_Abba_Fan

Exhaust Guru
Joined
Aug 18, 2006
Messages
14,410
Reaction score
937
Points
113
Location
Bunbury, WA
Members Ride
Strange Rover
9/16" is actually bigger than 14mm, 14.2875 to be exact. 14mm will sometimes fit a 9/16" head but it will be tight.
 

red truck

New Member
Joined
Jan 25, 2009
Messages
44
Reaction score
0
Points
0
Location
just left of hell
Members Ride
VY one tonner / gen3 / 6speed
the head of the bolt is 9/16", and a short flat dwarf ring spanner is handy. Don't forget you have to bridge 2 wires at the diagnostic connector near the ECU. Hope you have small hands and thin arms. :whistling
 

Not_An_Abba_Fan

Exhaust Guru
Joined
Aug 18, 2006
Messages
14,410
Reaction score
937
Points
113
Location
Bunbury, WA
Members Ride
Strange Rover
Take the LH cover off and pull the heater hose up over the lip on the firewall and you will have more room.
 
Top