Ashog89
New Member
- Joined
- Oct 3, 2019
- Messages
- 1
- Reaction score
- 0
- Points
- 1
- Age
- 34
- Location
- Alice springs
- Members Ride
- VE SV6 MY08
Hay all, a mates trying to wire new (cheap) 6pin switch for drivers side window to the regulator /power etc. in a VX. Is this possible?
I've been searching for something to simply show which wires goes where, but we keep only achieving one direction operation.
So pictures show switch, pins and the vertical pins have power and LAI on the sides on switch.
The green/orange wire and blue/white wires come from the regulator and reds are meant for the power there's a couple more we'll use for earth/ground.
Any chance there's someone who could use my pic and the numbers for each pin to say what should be where.
Sorry for the long (first timer) thread
I've been searching for something to simply show which wires goes where, but we keep only achieving one direction operation.
So pictures show switch, pins and the vertical pins have power and LAI on the sides on switch.
The green/orange wire and blue/white wires come from the regulator and reds are meant for the power there's a couple more we'll use for earth/ground.
Any chance there's someone who could use my pic and the numbers for each pin to say what should be where.
Sorry for the long (first timer) thread
