Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

6sp manual about to die?

oosty85

YSPOOL
Joined
Apr 13, 2009
Messages
155
Reaction score
0
Points
0
Age
38
Location
South West Sydney
Members Ride
VZ SS 5.7 & VR CALAIS 5L
hey, well just today driving home from work t i noticed my vz ss making a hell loud squeeling noise on the highway just cruising and with further investigations, i have found that the gearbox is making this noise at its worst when it is under load letting the clutch out in gear!!

it's only gotten worse the more i drive it and i'm lost as to wat part in the gearbox this could be and if it is just something came loose or worse.

if anyone has had the same problem or any ideas would be great..cheers.

ps: should i drive it tomorrow?? it's my only way to and from work but i dont want to multiply repair costs $$$$$!!
 

GTRwilson

sell me your VY sigs!
Joined
Nov 8, 2008
Messages
365
Reaction score
1
Points
0
Location
Brisbane
Members Ride
VZ SV6
I would be worried about completely blowing it. Take it to a specialist ASAP. Can you borrow a car or get a lift? :p
 

oosty85

YSPOOL
Joined
Apr 13, 2009
Messages
155
Reaction score
0
Points
0
Age
38
Location
South West Sydney
Members Ride
VZ SS 5.7 & VR CALAIS 5L
spewing mannn, this is bullshiz!! yesterday = PERFECT...today = about to die.

nope, no one from work lives within 50kms of me..and moolah is an issue now too as i just put alot of it into my other pain in the neck V8... ideas anyone? i have a hoist at home here and i'm about to put it up soon. need to know wat to look for tho with car turned off and no noise to follow
 

Travy

A bogan with style
Joined
Feb 23, 2008
Messages
237
Reaction score
3
Points
0
Age
44
Location
Victoria
Members Ride
VC SL/E & FG XR50 Turbo
Is the oil level correct?
 

oosty85

YSPOOL
Joined
Apr 13, 2009
Messages
155
Reaction score
0
Points
0
Age
38
Location
South West Sydney
Members Ride
VZ SS 5.7 & VR CALAIS 5L
after a alot of searching and shaking and testing the fluid (which was full and clean), i found the culpret at last!!

behind the gearbox connected to the housing there are 2 brackets which hold the dual exhaust pipes and the passenger side bracket was broken in half at the nut and ends were squeaking together ridiculously loudly everytime the gearbox was under load and shaking (u would never suspect it)...barely visable and took alot of torch hunting!!

Looks like the cat converter has taken a knock and snapped the bracket just in front of it.. never lower ur car too much!!
VERY VERY relieved
 

PaulSV6

CHE Tuned 156.8rwkw
Joined
Jun 10, 2008
Messages
1,384
Reaction score
11
Points
0
Location
Castle Hill
Members Ride
VZ SV6 M6, MY10 VE SV6 Sportswagon & MY03 XC SRI
U can be lucky!
 

Travy

A bogan with style
Joined
Feb 23, 2008
Messages
237
Reaction score
3
Points
0
Age
44
Location
Victoria
Members Ride
VC SL/E & FG XR50 Turbo
Good outcome!!!

Rather inexpensive fix compared to the alternatives!
 

oosty85

YSPOOL
Joined
Apr 13, 2009
Messages
155
Reaction score
0
Points
0
Age
38
Location
South West Sydney
Members Ride
VZ SS 5.7 & VR CALAIS 5L
haha hell yes lucky...it was getting a bit frustrating there for a while!
but yes, it looks like this bracket is gonna be a common problem with lowered vz manuals. such a flimsy little thing which sounds so bad.
cheers.
 

PaulSV6

CHE Tuned 156.8rwkw
Joined
Jun 10, 2008
Messages
1,384
Reaction score
11
Points
0
Location
Castle Hill
Members Ride
VZ SV6 M6, MY10 VE SV6 Sportswagon & MY03 XC SRI
Is it possible to strengthen it, to stop it from rattling?
 

oosty85

YSPOOL
Joined
Apr 13, 2009
Messages
155
Reaction score
0
Points
0
Age
38
Location
South West Sydney
Members Ride
VZ SS 5.7 & VR CALAIS 5L
i just loosened the bolt which holds it and half of the bracket fell off onto the ground. so i tightened it back up on the good half. there is still enough of the bracket left under the bolt to hold it down..

but yeh my brother's welding it up this weekend, along with the same area of the drivers side un-broken one.

i meant to take pics while on hoist.
 
Top