Phreddy
Bye SV6 - still love you
- Joined
- Apr 5, 2005
- Messages
- 1,425
- Reaction score
- 40
- Points
- 0
- Location
- W-Sydney NSW
- Website
- www.asr-audio.com.au
- Members Ride
- VS-II Statey-8
Unfortunately no it doesn't have the wiring in place. The best bet is to run some cable from the rear door speaker wiring behind the B pillar trims. (can't remember the colours, sorry!)
Bear in mind that you'll have to disconnect the back door speakers though, 'coz otherwise you'll have too much load on the HU outputs - they can only run 4 ohm minimum impedance. If you hook up both the parcel shelf 6x9s and the door speakers, you'll be presenting a 2 ohm load, and the output chips won't handle it.
Cheerz!
Bear in mind that you'll have to disconnect the back door speakers though, 'coz otherwise you'll have too much load on the HU outputs - they can only run 4 ohm minimum impedance. If you hook up both the parcel shelf 6x9s and the door speakers, you'll be presenting a 2 ohm load, and the output chips won't handle it.
Cheerz!