97 VT - Missing and sometimes stalling once warm. Some repairs done, still no better.

[hsv4me05]

Hi Guys,
Hopefully i can get some help with my 97 VT.
Once the engine is warm it will miss and fart and carry on, occasionally stalling. Not sure if its just a coincedence or not but it seems to only stall going round corners or roundabouts :banstick:
What I've replaced:
Cam Angle Sensor.
Crank Angel Sensor.
Plugs.
Leads.
Coil Pack.
Fuel Filter.
Fuel Pump.
The problem is still there :banstick: when I get the fault codes it comes up with #49 - Cam Angle or Crank Angle Sensor (signal Intermittent) any suggestions on what that could be ??
Cheers Guys.

 

[Mick1988]

I've heard the magnets that the crank angle sensor uses to read can come detached.

 

[vxcommie]

Check ur purge valve near the throttle body. If that has come loose it will stall. But it sounds like it's the fault

 

[hsv4me05]

How do I know if the magnets that the crank angle sensor uses to read have detached ?
The purge valve is still attached.
Any Idea how to fix fault code 49 ?

 

[Mick1988]

You have to remove the timing cover.

This post shows you what you are looking for - http://forums.justcommodores.com.au...rough-idle-slight-miss-ideas.html#post1793613

 

[hsv4me05]

Thankyou :beer chug:
Hopefully I get the bucket of **** fixed soon. :banstick:

 

[Mick1988]

If that's not it, try your DFI module (the board that the coils seat into).

 

[hsv4me05]

Cheers, will let you know how we go.