Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

a few stupid questions

bitch

New Member
Joined
Sep 23, 2005
Messages
112
Reaction score
1
Points
0
Age
44
Location
melbourne
Members Ride
vh worked 5ltr
ok i have just bought a worked 5 ltr for my vh and its in and running but not the best and there is a few things that have me a bit worried so im gonna ask some stupid questions...

does anyone know were i can find a quadrajet vacuum diagram?

ive checked the cooling system but it seems to be running hot... well hotter than the old engine is this normal?

doesnt want to idle in gear (auto) and if it does it idles too high out of gear... any ideas?

ummm...... i think thats it for now
any help and opinions are much appriciated
thanx heaps
 

craigvk

Banned
Joined
Jun 4, 2005
Messages
1,981
Reaction score
23
Points
38
Members Ride
VK 5L Calais
does anyone know were i can find a quadrajet vacuum diagram?

Check out Nardek, http://www.nardek.com.au/

I bought a diaphragm off them a while ago for about $60.
Buy from them direct as places that sell their stuff mark up the prices and you could be paying 20% more.

ive checked the cooling system but it seems to be running hot... well hotter than the old engine is this normal?

As long as it's below the red line it should be ok. The guage should sit around half or just over half when hot. Make sure you use coolant and not water.

doesnt want to idle in gear (auto) and if it does it idles too high out of gear... any ideas?

When you say it doesn't idle in gear, does it stall or chug or what?

The idle in gear should be approx 650-700 rpm and in neutral or park it should be approx 850 rpm. When cold and warming up (if the choke is working) should be at about 1100-1200 rpm. You will just need to adjust the carb to get it right.

Make sure your ignition timing is set properly, 6 degrees from memory.
 

bitch

New Member
Joined
Sep 23, 2005
Messages
112
Reaction score
1
Points
0
Age
44
Location
melbourne
Members Ride
vh worked 5ltr
Check out Nardek, http://www.nardek.com.au/

I bought a diaphragm off them a while ago for about $60.
Buy from them direct as places that sell their stuff mark up the prices and you could be paying 20% more.

sorry dude i did mean diagraram to see what vac hose goes where :)

the temp thing your spot on its sitting just over half when hot.... so that ok

in park it idles around 800rpm and drops to about 600rpm but it stalls after about 10secs or so and if i get it too idle without stalling then put it in park the idle jumps up to around 1200rpm and it slams into gear at that
 

craigvk

Banned
Joined
Jun 4, 2005
Messages
1,981
Reaction score
23
Points
38
Members Ride
VK 5L Calais
Check the vacuum hoses. The carb might need to be rebuilt. The problem sounds like it's to do with the carb.

I couldn't find a diagram in my manuals. What hoses are you unsure of? I can tell you where to connect them. Most of them connect to the manifold.
 

bitch

New Member
Joined
Sep 23, 2005
Messages
112
Reaction score
1
Points
0
Age
44
Location
melbourne
Members Ride
vh worked 5ltr
pretty much all of them.... most were missing when i got it
 

craigvk

Banned
Joined
Jun 4, 2005
Messages
1,981
Reaction score
23
Points
38
Members Ride
VK 5L Calais
I dug up these. They should help you. :thumbsup:
 
Last edited:

bigg_vin

New Member
Joined
Sep 8, 2005
Messages
315
Reaction score
0
Points
0
Location
Melbourne
Members Ride
VH V8
the stalling will be due to a vac hose going to the wrong place on the carby..... or maybe a vac hose missing.....
 

sk00bs

Member
Joined
Jul 13, 2005
Messages
100
Reaction score
0
Points
16
Age
39
Location
sydney
Members Ride
vh sle
how much would you look at paying to rebuild a carb?
i think i will need to do this shortly
 

craigvk

Banned
Joined
Jun 4, 2005
Messages
1,981
Reaction score
23
Points
38
Members Ride
VK 5L Calais
About $50 for a kit available from Repco, Autobarn etc...

Or about $200-$250 for a rebuilt change over one from carb specialists.

They can be fiddly. There is a lot of pieces and you need to have patients.
 
Top