After installing LEDs we have no dash lights.

[theburna57]

We had driving lesson in the ute last Sunday and the odometer stopped wroking. I ordered the part and while grandson is away on holidays I decided to fix the odometer.

Whilst I had the car apart I purchased LEDs for the 4 T10 dash cluster light after finding 3 were blacked out. Now I can't get the cluster lights to work?!
Has anyone had this issue after removing the dash. I've went through the fuses and can't think of anything else.

Does anyone have a schematic of the wiring for the 3 plugs at the back so I can test them.

HHHHHHHHHEELLLLLLLLLPPP

Poppy is in deep ****.

 

[07GTS]

most l.e.d's only go one way (positive, negative sensitive) so just take them out and turn them 180 deg in holder see if it helps, otherwise check fuse first just encase its an easy fix

 

[theburna57]

will do tomorrow. My luck I will have all the wrong way around
Thanx

 

[shane_3800]

I learnt about diodes when I was seven. Well a parts guy I have knowen for 20 years sold me some LED park globes. One didn't work so I demanded a replacment he asked if I installed them correctly I insisted I did. He gave me a replacement and I installed it and it didn't work. So I turned it around..............
I have to have some sort of autisim I swear.

 

[MYVESSV8]

led's are polarity sensitive, as said turn 180 deg and see

 

[krusing]

Your not alone !
You had 50% of getting right the first time

 

[VS 5.0]

Your not alone !
You had 50% of getting right the first time

Just like plugging in a USB cable.

I'm on the wrong side of 50% more often than not.

 

[lmoengnr]

Just like plugging in a USB cable.

I'm on the wrong side of 50% more often than not.

USB C for the win!