Geoff Wilson
New Member
- Joined
- Jul 6, 2019
- Messages
- 1
- Reaction score
- 0
- Points
- 1
- Age
- 57
- Location
- Mackay
- Members Ride
- VS Executive Sedan
Air con fan control only works on 3 or high any solutions
Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.
Air con problem
- Thread starter Geoff Wilson
- Start date
BlackVXGTS
Well-Known Member
- Joined
- Aug 14, 2004
- Messages
- 5,501
- Reaction score
- 2,510
- Points
- 113
- Location
- Melbourne, SE
- Members Ride
- GEN-F2 GTS A6, VS Clubsport 185 A4
Sounds like you might have a partially faulty fan speed controller. To replace:
4.15 FAN MOTOR SPEED CONTROLLER
REMOVE
1. Disconnect battery ground cable.
2. Remove the wiper arms, plenum water deflector and remove the two screws securing the speed controller cover.
3. Unclip the harness retainer and unplug the two harness connectors
4. Remove the two screws securing the speed controller to the heater/evaporator case and remove the speed controller.
REINSTALL
Reverse removal operations.
4.15 FAN MOTOR SPEED CONTROLLER
REMOVE
1. Disconnect battery ground cable.
2. Remove the wiper arms, plenum water deflector and remove the two screws securing the speed controller cover.
3. Unclip the harness retainer and unplug the two harness connectors
4. Remove the two screws securing the speed controller to the heater/evaporator case and remove the speed controller.
REINSTALL
Reverse removal operations.
vs-lover
Well-Known Member
- Joined
- Mar 9, 2013
- Messages
- 2,644
- Reaction score
- 1,812
- Points
- 113
- Location
- Adelaide
- Members Ride
- VS S2 Calais, VS S2 Exec Wagon, VS S2 Acclaim
Hi BlackVXGTS and Geoff,
Commonly called the "Fan resistor" which on Holden's seems to be in the most stupid position service wise.
Commonly called the "Fan resistor" which on Holden's seems to be in the most stupid position service wise.