Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Air flow meter

Discussion in 'VN - VP Holden Commodore (1988 - 1993)' started by Leebo, Mar 13, 2009.

  1. Mar 13, 2009 #1
    Leebo

    Leebo New Member

    Messages:
    241
    Likes Received:
    1
    Trophy Points:
    0
    Joined:
    Feb 12, 2009
    Location:
    Victoria
    Members Ride:
    89 VN
    Hey guys i just have a VN V6 pretty standard under the hood and i have the engine light showing (I'll diagnose that later after this)

    I don't have an Air flow meter where the pipe meets the airbox.
    my brothers VS had one there and his VL.

    I'm just asking is this normal like on ther VN's or is mine missing it?
     
    Leebo, Mar 13, 2009
    #1
  2. Mar 13, 2009 #2
    delcowizzid

    delcowizzid on holiday

    Messages:
    6,946
    Likes Received:
    404
    Trophy Points:
    83
    Joined:
    Jul 8, 2008
    Location:
    NZ
    Members Ride:
    в∞ѕтεכ √&
    vn dont have a MAF they run a MAP sensor instead its on the firewall with a little hose going into it
     
    delcowizzid, Mar 13, 2009
    #2
  3. Mar 13, 2009 #3
    Leebo

    Leebo New Member

    Messages:
    241
    Likes Received:
    1
    Trophy Points:
    0
    Joined:
    Feb 12, 2009
    Location:
    Victoria
    Members Ride:
    89 VN
    Yeah i was looking at that and i thought that might be it. It's that sensor that sits on the firewall with the little green clip isn't it?
     
    Leebo, Mar 13, 2009
    #3
  4. Mar 13, 2009 #4
    Morton

    Morton For external use only

    Messages:
    4,097
    Likes Received:
    83
    Trophy Points:
    0
    Joined:
    May 20, 2006
    Location:
    Melbourne
    Members Ride:
    Fairstar the Funship
    That's the one.
     
    Morton, Mar 13, 2009
    #4
  5. Mar 13, 2009 #5
    Leebo

    Leebo New Member

    Messages:
    241
    Likes Received:
    1
    Trophy Points:
    0
    Joined:
    Feb 12, 2009
    Location:
    Victoria
    Members Ride:
    89 VN
    Wiked thanks guys, just wanted to clear that up.
     
    Leebo, Mar 13, 2009
    #5
  6. Mar 13, 2009 #6
    delcowizzid

    delcowizzid on holiday

    Messages:
    6,946
    Likes Received:
    404
    Trophy Points:
    83
    Joined:
    Jul 8, 2008
    Location:
    NZ
    Members Ride:
    в∞ѕтεכ √&
    did ya check your error codes yet
     
    delcowizzid, Mar 13, 2009
    #6
  7. Mar 13, 2009 #7
    Leebo

    Leebo New Member

    Messages:
    241
    Likes Received:
    1
    Trophy Points:
    0
    Joined:
    Feb 12, 2009
    Location:
    Victoria
    Members Ride:
    89 VN
    Nah i will have to check that prob with the paper clip and that etc if u know what i mean.

    It's probably the O2 sensor just by looking at it. It's all melted and sad. I'll just replace that anyway cos it looks like **** and could be the problem and is cheap so i will see how that goes.

    Those CEL on the VN's and VP's were faulty from factory anyway my dad has replaced one after another of them over the years.
     
    Leebo, Mar 13, 2009
    #7

Share This Page