Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Alarm wiring diagram for VE SS ute 2009

infection00

New Member
Joined
Jun 16, 2014
Messages
2
Reaction score
0
Points
0
Location
Australia
Members Ride
2006 WM Statesman
Trying to find a wiring diagram for an alarm install and ive had no luck so far, can anyone help me out?
i have a 2009 VE SS ute
 

Tasmaniak

Not a valid input....
Joined
Apr 30, 2005
Messages
8,094
Reaction score
131
Points
63
Age
41
Location
S.E. Melbourne
Website
www.ranjinstallations.com.au
Members Ride
VR Stato, C180 Kompressor, Prado and Ka
Which alarm are you trying to fit?

Virtually all wiring is done at the BCM in a VE alarm.
 

infection00

New Member
Joined
Jun 16, 2014
Messages
2
Reaction score
0
Points
0
Location
Australia
Members Ride
2006 WM Statesman
Yea I'm aware most wires splice into the bcm but I need to know what wire is what
it's a viper responder
not to hard only like 8 splices to do
it baffles me no one has ever tried to do it don't really want to fork out to have it installed
 

Tasmaniak

Not a valid input....
Joined
Apr 30, 2005
Messages
8,094
Reaction score
131
Points
63
Age
41
Location
S.E. Melbourne
Website
www.ranjinstallations.com.au
Members Ride
VR Stato, C180 Kompressor, Prado and Ka
Plenty of people have tried it... Plenty of people have succeeded. If I had a dollar for every VE I've cranked out. But the reality of why you don't see a great deal of information for them is that most people go with the CANBUS upgrade alarm so that it works off the factory remote and no extra remotes are required.

Constant – Red and a Red/Black in drivers kick panel in 2 pin plug
Earth – You know the rules... make your own

Green plug:
Ignition – Pink-Pin14
Accessories – Brown-pin 21
Starter – White/Black (you need to apply 12+ through a 6.3K resistor and then add 12+ through a 9.3K resistor to force the engine to crank

Grey Plug
Door Lock – grey/black (neg pulse)
Door Unlock -
Brown/black all doors (neg pulse)
Lt blue drivers door only (neg pulse)

White Plug
Park lights – Brown/White pin8 (NEGATIVE)
Headlights – White pin12 (will trigger whatever stalk is set at.)
Domelight – dark blue/white pin5 (positive)
Boot release – dark blue pin17 (negative)

Pink Plug
Left Doors switch – grey/black pin10 (negative) Must diode isolate from right door wire
Right doors switch – brown/white pin 8(negative)Must diode isolate from left door wire
Boot switch – orange/black pin 22 (negative)
Alarm Arm – pink/black pin 23 (negative pulse)
Alarm Disarm – pink pin 20 (negative pulse)
Brake – light blue pin 2 (positive)

Brown Plug
Front Left Indicator – light blue/white pin 4 (positive) diode isolate
Rear Left indicator – Yellow/black pin 1 (positive) diode isolate
Front Left – Located in the Black plug.. no clue why
Rear Right indicator – green/white pin 2 (positive) diode isolate
Hand brake – orange/black pin 16 (negative)
Horn – brown/black pin 18 (negative)
Wipers – grey pin 20 (positive) Will trigger the wipers to whatever position the stalk is set at

Black Plug
Front Left indicator – Dark Blue/White pin 5(positive) diode isolate
 
Top