Speedy66
New Member
- Joined
- May 30, 2017
- Messages
- 10
- Reaction score
- 1
- Points
- 1
- Age
- 45
- Location
- Melbourne
- Members Ride
- VE SV6 S2
Hi Guys, i'm planning out the power wiring for my Stereo install, need to run 2X 8AWG lines for my 2 amps one will be in the boot the other under passenger seat
Was going to keep the original battery connector and add a ring terminal with 4AWG into a fused splitter, but would like to know what other members have done?
noticed there is a rather large power (4AWG?) wire running from the boot the the engine jump start terminal can I tap into that with a distribution block seems like it will simplify the process but not sure if it will interfere with other components
Was going to keep the original battery connector and add a ring terminal with 4AWG into a fused splitter, but would like to know what other members have done?
noticed there is a rather large power (4AWG?) wire running from the boot the the engine jump start terminal can I tap into that with a distribution block seems like it will simplify the process but not sure if it will interfere with other components