Another issue.HB maybe.

[Trevor loves holden.]

Thanks.

Make sure you push it in by hand first, lining it up and using the bolt wont always work, you slide it in rotating the HB back and forwards a little to help it go into the seal with a bit of grease to avoid damage to seal, you will feel it go into the keyway by hand then torque it up.

 

[crelok]

Ok,seal in,HB in.....had to use a bit of wood to stop engine from turning/hole for socket and 2 bolts connected to HB.tight as tight.so far so good.once again thank you all for your help.