Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Auto Temp Fault code after stall installation

wagonman54

New Member
Joined
Apr 3, 2009
Messages
4
Reaction score
0
Points
0
Members Ride
vx exec wagon
Evening,

First post as a new member, so hope I do not break any rules!:bow:

Had a high stall put in reently and am getting error codes in relation to trans
temps?
Suggestions so far have suggested that the seal on the main shaft may be faulty, or that due to the fact that the stall was second hand maybe end play of the crank may contribute to this?

Any feedback would be appreciated.:thumbsup:

Cheers,

54:yeah:
 

delcowizzid

on holiday
Joined
Jul 8, 2008
Messages
6,988
Reaction score
445
Points
83
Location
NZ
Members Ride
в∞ѕтεכ √&
is the trans temp sensor still plugged in .clear the codes by dissconnecting the battery for a few minutes and see if the code comes up again.if its showing the code before the box has even warmed up ide say sensor issue.
oh and welcome along.
 

wagonman54

New Member
Joined
Apr 3, 2009
Messages
4
Reaction score
0
Points
0
Members Ride
vx exec wagon
Evening,

Thanks for the reply much appreciated.
Will give it a go and see what happens.

Cheers,

Wag54:thumbsup:
 
Top