boomnvn
SOLDER, NO CRIMP.
- Joined
- Oct 9, 2006
- Messages
- 138
- Reaction score
- 1
- Points
- 0
- Age
- 39
- Location
- Croydon
- Website
- www.KungFuKustoms.com
- Members Ride
- VT Exec S1 V6
Hey all, fitted my Autometer air fuel ratio gauge into my VT V6 auto tonight, and encountered a problem of numerous LED's lighting up at once. Has anyone come across this before?
It's the same when the engine is stopped as well as running.
I've wired up the oxy sensor wire to pin D15 (violet) according to here -> http://memcals.com/pdf/VTV6 Auto Wiring Diagram.pdf and pos/neg are supplied from the cig lighter.
The gauge is second hand, and was working when it came out of my mate's car as well.. I did test it outside the car and it worked ok (went straight to the richest green LED), then installed and now have this problem.
Has anyone here encountered this?
Cheers,
Spudley.
It's the same when the engine is stopped as well as running.
I've wired up the oxy sensor wire to pin D15 (violet) according to here -> http://memcals.com/pdf/VTV6 Auto Wiring Diagram.pdf and pos/neg are supplied from the cig lighter.
The gauge is second hand, and was working when it came out of my mate's car as well.. I did test it outside the car and it worked ok (went straight to the richest green LED), then installed and now have this problem.
Has anyone here encountered this?
Cheers,
Spudley.