Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Bcm removal?

lout

Well-Known Member
Joined
May 13, 2006
Messages
5,544
Reaction score
4,242
Points
113
Age
60
Location
Langwarrin Victoria
Members Ride
VXii Executive V6 , VYii Adventra LS1
disconnect battery
remove panel under steering wheel
unplug bcm
remove bcm
 

Lex

Well-Known Member
Joined
Sep 19, 2012
Messages
5,849
Reaction score
5,203
Points
113
Location
Geelong Victoria
Members Ride
VT Executive S1 V6 6 speed Auto Wagon
Mine is behind the fuse board .looks like i have 2 remove it?
Once that panel is removed (lout mentioned) the bcm just pulls down.
You will have to take the plugs of first before the bcm will come completely out.
 

danoz vt vz

Member
Joined
Jun 2, 2019
Messages
55
Reaction score
7
Points
8
Age
46
Location
casino
Members Ride
vt 2000 wagon ve omega sportswagon
Lads that was a terrible effort of telling the lad how 2 do it.He knows he needs the box moved location of screws or techniques would of been good.Also does the bcm clip in and does it need to be pulled or slid left or right or there any tangs that have to be pressed for removal.People usually arrive here cause they are stuck the fastest easiest most informed way of doing this helps beyond belief.Or anything.
 

accentstencil

Well-Known Member
Joined
Jun 30, 2005
Messages
8,376
Reaction score
586
Points
113
Age
71
Location
Caboolture South, QLD
Members Ride
WH II Caprice, 5.7 2018 Equinox LTZ V
An old post I know, but for future reference you push the bottom of the BCM forward (towards the front of the car) to disengage the clips, then pull the BCM down.
No need to remove the fuse panel, just reach up behind it. A bit awkward but doable.
 

Fu Manchu

We’ll get together. Have a few laughs.
Joined
Mar 18, 2006
Messages
17,898
Reaction score
22,551
Points
113
Location
WA.
Members Ride
VZ Crewman, VZ Cross 8, & ya mum.
Can confirm. You get upside down in the foot well and do as above. Takes a minute or so to do.
 

lout

Well-Known Member
Joined
May 13, 2006
Messages
5,544
Reaction score
4,242
Points
113
Age
60
Location
Langwarrin Victoria
Members Ride
VXii Executive V6 , VYii Adventra LS1
Lads that was a terrible effort of telling the lad how 2 do it.He knows he needs the box moved location of screws or techniques would of been good.Also does the bcm clip in and does it need to be pulled or slid left or right or there any tangs that have to be pressed for removal.People usually arrive here cause they are stuck the fastest easiest most informed way of doing this helps beyond belief.Or anything.
almost as helpful as your post
 

lout

Well-Known Member
Joined
May 13, 2006
Messages
5,544
Reaction score
4,242
Points
113
Age
60
Location
Langwarrin Victoria
Members Ride
VXii Executive V6 , VYii Adventra LS1
deleted
 
Top