Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Begginner VP Commodore Owner Interior Help :)

hehecherie

New Member
Joined
Nov 30, 2011
Messages
2
Reaction score
0
Points
0
Location
Bundaberg
Members Ride
VP Commodore
This is my 1st Post.. Im buying a 93 VP tomorrow and I dont like the interior..

If i wanted to replace things like door trims, dash, seats etc.. is there another holden model that would fit straight in?

Did this model come with options like leather seats, velour etc?

Cheers Guys
 

ryan21

New Member
Joined
Oct 16, 2010
Messages
122
Reaction score
1
Points
0
Location
melbourne
Members Ride
89 vn calais v6
Most vn/vp parts will fit in without too much modification unless its they're electrical parts. the vn/vp calais did come in velour and leather.

The vn calais interior looks like this, is something like that what you’re after? you could also check out the my ride section for some inspiration.

002-1.jpg
 

SWA90N!!

New Member
Joined
Nov 30, 2011
Messages
12
Reaction score
0
Points
0
Age
29
Location
penrith
Members Ride
1999 VT equipe wagon
or a statesman cluster and dash?
 

E-T-H-A-N

New Member
Joined
May 23, 2009
Messages
159
Reaction score
0
Points
0
Location
gawler, adelaide
Members Ride
vt s pack manual
vp calais international interior ? vt/x seats bolt in easy too.
 

mr calais 5.0

New Member
Joined
Jun 7, 2011
Messages
1,723
Reaction score
1
Points
0
Location
victoria
Members Ride
vy s 2003
My vn came with leather seats.. Vr vs dash will work if you have a day to spare. st80 dash is cool too..
How much money do you wanna spend?
 

Randymate

Member
Joined
Nov 2, 2011
Messages
50
Reaction score
0
Points
6
Location
Young, NSW
Members Ride
VE SSV Redline
Im with you one this one too... i was looking at putting VS seats into my VP but wasn't sure if they would fit straight in? could anyone help? :)
 

Rusty

٩(-̮̮̃•̃)۶
Joined
Mar 27, 2010
Messages
1,048
Reaction score
23
Points
0
Location
Queensland
Members Ride
Vt with VU/VZ bits
Im with you one this one too... i was looking at putting VS seats into my VP but wasn't sure if they would fit straight in? could anyone help? :)

VN to VS front seats are all straight bolt in using the existing rails. You can avoid mod compliance if using the existing rail also. 8 Allen key bolts, 20 mins and a sore back will have the seats installed. The rear require some modifying but that part needs to be confirmed?

VT and on are a pain to install and require compliance plates (in qld anyway)
 

328FTW

New Member
Joined
May 29, 2011
Messages
69
Reaction score
2
Points
0
Age
35
Location
New Zealand
Members Ride
VN SS
That looks great, the black is way better than the grey

I've been slowly adding to my interior I made, this was the other day when I was bored

004-5.jpg







I made a thread somewhere if you look through my posts. It's another option, most people it's not really the route they want but I'm pretty pleased of how it turned out and like showing it off.

010-3.jpg


004-4.jpg


007-2.jpg


006-9.jpg


005-6-1.jpg






Only issue is watching it like a hawk cause it's distinctive and I get the wrong kind of attention as well. You seem to be looking for bolt on options though, this is not bolt on and go but still.
 
Top