I have just had my VS into the auto sparky's to get the dashlights working and since then I have an audible code sounding every few minutes, I took the car back to the sparky's but they were less then useful, the code is 2 long beeps followed by 4 or 5 short, does anybody know what this is or where I could find a list of the codes?, also the original problem was no dash lights at all but now I have the top part of the dash OK but still not the LED displays anybody got any ideas? Thanks in advance
first thing id suggest is to take the cluster out and make sure the cables that go into the back are in properly... one of them may not be which is probably what is causing the LED displays to not light up, if u dont know how to take the cluster out there is a write up in the HOW TO section. but yeh there are 3 main cables with plugs that are kinda like computer plugs on the end, make sure all 3 are plugged in properly n see how u go... i dont know if thats whats causing the beeping tho, if that doesnt solve your problem i have no idea
