Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Best Injector Replacement for a VN

dvspcs

New Member
Joined
Sep 4, 2006
Messages
4
Reaction score
0
Points
0
I'm doing some work on my sons VN Calias and have found one of the injectors are stuffed so I'm going to get a set of Reco Injectors, what model injectors would be the best.

VN,VR or VS

are they a direct swap or whould I run into problems
 

xcop5l

4th year spanner spinner
Joined
Jun 19, 2006
Messages
977
Reaction score
11
Points
0
Location
ol' geelong vic
Members Ride
VN ex cop 5L
there a basic swap but use silicone spray or similar on the o rings coz they can grab and tear then youve got a leak
 

dvspcs

New Member
Joined
Sep 4, 2006
Messages
4
Reaction score
0
Points
0
so the VS would be OK or just go for the VR one's
 

glowworm

Member
Joined
Oct 14, 2006
Messages
300
Reaction score
4
Points
18
Members Ride
vt exective
vn to vs are all the same VT are not they are different ..glow
 

FXST01

The Grey Man
Joined
Jun 3, 2005
Messages
1,109
Reaction score
52
Points
48
Location
Perth, WA
Members Ride
VP V6 Exec
VN series 1, 8-88 to 10-90 uses injector number 0280-150-901 which flows 146.3 GPM @ 3 BAR. Resistance 14.5 Ω.

VN series 2, 11-90 to 10-91 uses injector number 028-0150-960 which flows 150.5 GPM @ 3 BAR. Resistance 14.5 Ω.

These injectors are also fitted in the
VG UTE 11-90 to 10-91, VP COMMODORE 11-91 to 07-93 and the VR COMMODORE 06-93 to 04-95.

VT - VY N/A, 09-97 to 06-03, uses injector number 0280-155-777 which flows 150 GPM @ 3.5 BAR. Resistance 12 Ω.

The VN - VR injectors are what is classed as an EV-1 injector pintle type which are open to problems when used at an incorrect fuel pressure, hosing is a problem if pressure is too low or too high and the pattern can also be forced too wide for the target area if pressure is too high.

VT - VY injectors are what is classed as an EV-6 injector which uses a multi orifice director plate style technology to better atomise fuel across various operating pressures. These injectors allow more flexibility in relation to operating pressures without compromising spray efficiency or fuel atomisation.
 
Last edited:
Top