Blinker won't turn off

[Phillbert]

Hey guys my blinkers don't automatically turn off after a turn,
I replaced the blinker/cruise control stalk but still the same, what is the next step to try?

 

[deserthead]

Plasitc tab on the back of your steering wheel has probably broken off.

 

[Paul67]

Mine doesn't cancel either. I have replaced the stalk. Can it be fixed without removing wheel?

 

[Phillbert]

Plasitc tab on the back of your steering wheel has probably broken off.

That makes sense, the last owner had a Sports Wheel and threw the VS wheel on at the last min. I will put a Sports Steering Wheel back on in a few weeks so hope that will sort it out.
Thanks

 

[wildfiremaint]

I had the same problem - not cancelling. Got an aftermarket stalk
from Ebay and that didn’t work
either. The new one too short or the tab on the steering worn. Made a new tab out of plastic plumbing pipe from Bunnings. Has been working fine for years.

 

[Phillbert]

Hey that looks simple to do, cool

 

[_R_J_K_]

A lot of people refer to it as a 'cancel cam', been a few threads about it in the past and seems to be a common issue.

 

[vs-lover]

There are two different types. The early one as depicted in the above post and the later one that is the common failing item that was rather cheaply made and can't take the strain over the years, thus it snaps and then your indicators will not cancel.

If you have to replace yours make sure you obtain the earlier Series 1 version that's the same as on the VR wheel. These are bullet proof and fit straight on.