Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Bonnet alignment

richrever

Member
Joined
Feb 18, 2017
Messages
34
Reaction score
1
Points
8
Age
54
Location
Perve
Members Ride
VPHDTUTE
A country dweller? One piece mudflap, b&s ball stickers,and cow horns across the back window?
Sorry just taking the piss. Enjoying the inter action.
Cheers Rich
 

_R_J_K_

Well-Known Member
Joined
Dec 20, 2008
Messages
5,126
Reaction score
705
Points
113
Members Ride
Zenki S14
I to have a problem with aligning my bonnet and it jamming closed. Ive just replaced it. One side at the front is lower than the guard and its slightly sqoowiff.
There should be a rubber stopper on each corner you can screw in and out to set the height. Would also look at the spring in the rad support that the pin latches to to see if it's damaged in any way.
 

richrever

Member
Joined
Feb 18, 2017
Messages
34
Reaction score
1
Points
8
Age
54
Location
Perve
Members Ride
VPHDTUTE
There should be a rubber stopper on each corner you can screw in and out to set the height. Would also look at the spring in the rad support that the pin latches to to see if it's damaged in any way.
Cheers RJK. Yup got it looking 99%. I removed the pin clised it and adjust corners with the stopers. Refitted pin and wound it out a few twists and voila. Gaurds need tweaking a bit but im happy for now.
Richrever01.
 
Top