vc commodore
Well-Known Member
- Joined
- Jun 18, 2014
- Messages
- 10,711
- Reaction score
- 12,585
- Points
- 113
- Location
- Like the Leyland Brothers
- Members Ride
- VC, VH and VY
I've had a search through and had no luck finding a solution
I have 4 wheel discs on my VC and when the brakes have got some heat in them, ie about 20 minutes of stop start driving, all 4 of my brakes lock on. The brake pedal also goes hard...
The car was off the road for 4 months, for a few running repairs....
Work done with the brakes.....I have cleaned and greased all caliper slides using bosch RB17 rubber grease....I have removed and cleaned the master cylinder out and bled all the brakes....I have had all 4 rotors machined and I replaced the rear pads....I have backed off the hand brake cable, so the handbrake doesn't work at the moment
When the brakes cool down ie after about 10 minutes, the brakes aren't locked on.....Any ideas where to look next? I've never struck this before, hence asking for any clues where to go next
I have 4 wheel discs on my VC and when the brakes have got some heat in them, ie about 20 minutes of stop start driving, all 4 of my brakes lock on. The brake pedal also goes hard...
The car was off the road for 4 months, for a few running repairs....
Work done with the brakes.....I have cleaned and greased all caliper slides using bosch RB17 rubber grease....I have removed and cleaned the master cylinder out and bled all the brakes....I have had all 4 rotors machined and I replaced the rear pads....I have backed off the hand brake cable, so the handbrake doesn't work at the moment
When the brakes cool down ie after about 10 minutes, the brakes aren't locked on.....Any ideas where to look next? I've never struck this before, hence asking for any clues where to go next