Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

CAI mod done !!

pillzor

New Member
Joined
Jun 9, 2009
Messages
664
Reaction score
2
Points
0
Members Ride
VS executive
but.... ive had too stick the breather piece down with silicone as there was not rivet holes as i was told there would be by claridge holden, this is only temp ofcourse .... cant see it causing any problems can it?

 

_R_J_K_

Well-Known Member
Joined
Dec 20, 2008
Messages
6,723
Reaction score
1,856
Points
113
Members Ride
Zenki S14
You have to drill the rivet holes. Just make sure you don't use a bit that's to big, and be careful not to hit the radiator when you've drilled through the shroud.
 

pillzor

New Member
Joined
Jun 9, 2009
Messages
664
Reaction score
2
Points
0
Members Ride
VS executive
yeh i seen that, i may not have too at this point tho because the silicone is holding rock solid.
 

camstatic

I'm back babeh.
Joined
May 19, 2006
Messages
327
Reaction score
4
Points
18
Location
Regional SA
Members Ride
VZ SS
I've just used short self-tapping screws with washers in the past.
 

pillzor

New Member
Joined
Jun 9, 2009
Messages
664
Reaction score
2
Points
0
Members Ride
VS executive
im actually very suprised with the performance gain for such a small mod!
 

ephect

Donating Member
Joined
Jul 27, 2006
Messages
5,902
Reaction score
15,428
Points
113
Location
Melbourne
Members Ride
VS Acclaim V6
its one of the best mods, very cheap and easy :) its always good to hear members DIY, nice work
 

pillzor

New Member
Joined
Jun 9, 2009
Messages
664
Reaction score
2
Points
0
Members Ride
VS executive
well with all the information provided on this forum ,,,, you just gotta do it yourself.
( not that CAI was difficult in anyway but damn it feels good too get it right!)
 

vsutespack

New Member
Joined
May 28, 2009
Messages
29
Reaction score
0
Points
0
Location
Sydney
Members Ride
VS S Maual 5 Speed Ute
Did mine the other night and also did a memcalchange all for 200 bucks with a high flow panel filter. The ute goes hard now
 
Top