Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Can a VT Berlina have steering wheel controls installed?

Doctor Bob

Grandpa
Joined
May 23, 2004
Messages
2,792
Reaction score
60
Points
48
Location
Retired
Members Ride
RG. Colorado & Caravan
you will need to make up the wiring loom, i spose i can part with one for $25

Rob
 

VTS5

TechJunkie
Joined
Jul 26, 2005
Messages
1,327
Reaction score
249
Points
63
Location
Sth.East\Melb
Members Ride
VE OMEGA 3.6L Dual Fuel
you will need to make up the wiring loom, i spose i can part with one for $25

Rob

Without that loom module wouldnt work,so can u make one up?Cause i got no idea.
 

holdenrules

New Member
Joined
Jan 11, 2005
Messages
142
Reaction score
1
Points
0
Location
VIC
Hi all,

Does anyone have a wiring diagram or knows which two wires are used for the steering wheel controls for a Series 1 VT Berlina?

My head unit is the stock Eurovox with a single CD, the part number on the sticker on top says 92050102 and has a single connector on the back.

I read somewhere it was pins 9 and 16, and different resistance across them do different functions. I connected the controls to both pins with hook up wire to test it and it didn't do squat.

As I was testing it, I didn't run it through the clock spring, would that have caused it not to work?

Apparently no resistance is Volume Down, so I tried shorting the pins directly and that did nothing as well, the volume stayed at the same level.

Thanks,
 
Top