Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Can someone help me with these error codes

cuckoo

Member
Joined
Feb 12, 2005
Messages
478
Reaction score
3
Points
18
Age
60
Location
Newcastle region
Members Ride
VT V6 twin Turbo
Hi got these codes now i know what they are except for 9 but can someone explain what they mean thanks here are the codes
9 -don't know what this 1 means
13- o2 sensor -no signal does that mean the sensor is stuffed or something else
31- theft detterent missing -what the hell does that mean
35- idle speed error- could the be the iac valve or something else
Thanks Cuckoo
 

vt1538

455rwhp LS3
Joined
Sep 28, 2005
Messages
897
Reaction score
23
Points
0
Age
52
Location
The Dead Centre
Members Ride
VY SS S2 [email protected]
Code 13 is for an open circuit to the O2 sensor. I would be checking all connections at first as you have multiple codes showing. Could be something like a bad earth connection.
 

TheForgotten

only human......
Joined
Dec 24, 2005
Messages
1,372
Reaction score
16
Points
0
Location
quarantine
Website
www.holdenscene.com
Members Ride
VR EXEC
code 31 - theft deterent signal missing, could mean a few things, such as PCM stuffed, key stuffed or wiring.
I can't find any info about any code lower than 12, you sure it's 9?
Not sure about 13 or 35, maybe talk to holden
 

Doctor Bob

Grandpa
Joined
May 23, 2004
Messages
2,792
Reaction score
58
Points
48
Location
Retired
Members Ride
RG. Colorado & Caravan
i think it will be 19 not 9, this indicates an error with the TPS, this in turn can cause the idle speed to be unstable.
31 probably indicates a faulty remote or reader
13 02 sensor RHS no signal, most probably a faulty sensor

Cheers Rob
 

cuckoo

Member
Joined
Feb 12, 2005
Messages
478
Reaction score
3
Points
18
Age
60
Location
Newcastle region
Members Ride
VT V6 twin Turbo
Doctor Bob said:
i think it will be 19 not 9, this indicates an error with the TPS, this in turn can cause the idle speed to be unstable.
31 probably indicates a faulty remote or reader
13 02 sensor RHS no signal, most probably a faulty sensor

Cheers Rob
hey doc it was done at a auto shop and he said 9 = stall
i dont know
Cuckoo
 

kopper69

New Member
Joined
Jul 20, 2005
Messages
2,617
Reaction score
34
Points
0
Age
34
Members Ride
VRII Acclaim
9 does not equal stall. Dont know where he got that from. A stall can be caused by a number of things and they will usually register a fault with the particular system that failed. ie a Crank Angle Sensor will give the 47. I would clear the codes and recheck them in a week. If they have appeared again, then do something about them. Best starting place is to get a good manual. A gregorys will go through the main error codes with checks and fixes.
 
Top