Holden vz
New Member
- Joined
- Jan 17, 2013
- Messages
- 46
- Reaction score
- 0
- Points
- 0
- Location
- melbourne
- Members Ride
- Ve Berlins
hey guys
today i was re wiring my fog lights so i removed the battery out of my car (placed it beside a flat battery on a piece of wood) for about an hour, i also cleaned up some speaker wire near the cars computer (never touched the computer) then i put the battery in everything electrical was working then i tried to start the car but all that happens is a clicking noise and the blue high beam indicator comes up on the cluster
these are some possible causes below
keep in mind that the battery is 4 months old
the negative terminal is bit loose has been fine every other day
i tried removing the wiring that i installed but the car still wont start
everything else electrical works on the car
any suggestions please leave a reply
cheers
:bang:
today i was re wiring my fog lights so i removed the battery out of my car (placed it beside a flat battery on a piece of wood) for about an hour, i also cleaned up some speaker wire near the cars computer (never touched the computer) then i put the battery in everything electrical was working then i tried to start the car but all that happens is a clicking noise and the blue high beam indicator comes up on the cluster
these are some possible causes below
keep in mind that the battery is 4 months old
the negative terminal is bit loose has been fine every other day
i tried removing the wiring that i installed but the car still wont start
everything else electrical works on the car
any suggestions please leave a reply
cheers
:bang:
Last edited: