Changed my motor now it has no spark

[Trevor loves holden.]

Yes we did try to put a plug in the lead and test for spark as you said, I will try start ya bastard and I’ll check power to injectors

Was the plug nut leaning on the engine? Happy new year..

 

[Jody Bowerman]

Was the plug nut leaning on the engine? Happy new year..

Yeah it was, also tried on the body of the car
Happy new year to you too

 

[Markvyssute]

Hey guys, I have a 2003 VY executive converted to manual. I bought it converted. Pretty sure it still has the auto ecu and loom as gauge cluster shows it in park. I put another motor in it and now it won’t start.
Has no spark, replaced cam angle sensor, crank angle sensor, oil pressure sensor, coil packs and leads. Don’t know what else to try
Does anyone know what to do to get it running?

I have built a drift spec rb30det before and the problem I came across when I changed it from auto to manual was reverse in the new box has a sensor wire....if it doesn’t have power from the ecu it acts as a safety cut...just a thought...

 

[Trevor loves holden.]

If you have no spark no use trying stating fluid, if your using the same gearbox then the Park sensor cut out wire should stay the same unless u changed the wiring loom , you need to test your dfi harness also look to see if the pins are touching and not bent. This might help you,
https://www.google.com/url?sa=t&rct...e_Manual.pdf&usg=AOvVaw25UkWBcLeiUsL0vJ7WQXQp