Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Changing driver's seat.

VYMAD

SILVERFOX
Joined
Jun 6, 2008
Messages
1,908
Reaction score
12
Points
38
Age
46
Location
BUNDABERG Q
Members Ride
VY EXECUTIVE S2
Hi all, my son just bought a VT and when you wind the driver's seat forward or back, the left hand side doesn't move, only the right.
So my question is if we get another seat off the wreckers, what's the go with changing them over? Isn't the seat belt clip with the pre- tensioner attached to the side of the seat? Wondering if the wiring (if any) will just unplug, and should the battery be disconnected so as not to log a code in the SRS? Cheers.
 
Joined
Feb 4, 2010
Messages
173
Reaction score
2
Points
0
Members Ride
VT
Yes disconnect the battery first (so you don't get the airbag light coming on)

from memory there is only two wires to be unplugged the airbag one and the one for the power seat motor.
 

VYMAD

SILVERFOX
Joined
Jun 6, 2008
Messages
1,908
Reaction score
12
Points
38
Age
46
Location
BUNDABERG Q
Members Ride
VY EXECUTIVE S2
K, thanks Dragon. Will give this a go when I get the chance.
 

oska

Active Member
Joined
Oct 14, 2010
Messages
815
Reaction score
46
Points
28
Location
melbourne
Members Ride
vx custom 600RR
i've put leather seats in mine

from the manual to disable the SRS disconnect both +ve and -ve and wait 10 seconds before disconnecting the pre tensioners
 

VYMAD

SILVERFOX
Joined
Jun 6, 2008
Messages
1,908
Reaction score
12
Points
38
Age
46
Location
BUNDABERG Q
Members Ride
VY EXECUTIVE S2
i've put leather seats in mine

from the manual to disable the SRS disconnect both +ve and -ve and wait 10 seconds before disconnecting the pre tensioners
Thank you. I will also pull the fuse as per the How-to of VY steering wheel removal.
Thanks for the replies.
 
Top