pete30nz
Active Member
- Joined
- Mar 21, 2011
- Messages
- 526
- Reaction score
- 96
- Points
- 28
- Age
- 43
- Location
- Christchurch, NewZealand
- Members Ride
- 1994 Vr berlina 3.8 v6 , 1996 VS executive 3.8 v6
Hi every one,
I'm about to have a look at flex plate, bolting it back to the engine, to rule it out.
Have had a look at the flex plate yesterday on the bench, and we couldn't see any thing visable wrong with it, no cracks.
I'm wanting to know the clearance(s) to look for while it's bolted back in place. One can be between the flex plate and the small bracket held with 2 bolts to the back of the sump. How much clearance should be here?
Will post a photo of the location while under there.
Cheers
I'm about to have a look at flex plate, bolting it back to the engine, to rule it out.
Have had a look at the flex plate yesterday on the bench, and we couldn't see any thing visable wrong with it, no cracks.
I'm wanting to know the clearance(s) to look for while it's bolted back in place. One can be between the flex plate and the small bracket held with 2 bolts to the back of the sump. How much clearance should be here?
Will post a photo of the location while under there.
Cheers
Last edited:
