Harvs82
Active Member
- Joined
- Dec 29, 2005
- Messages
- 1,134
- Reaction score
- 24
- Points
- 38
- Age
- 41
- Location
- Glen Waverley VIC
- Members Ride
- MY08 Subaru Liberty GT-B & MY16 VF II SS Redline
Hi All,
A mate at work is having trouble with his VT V6 exec, its been stalling a few times in peak hour traffic, I suspect that the good old crank angle sensor will be at fault, just as it was with my VS a number of years back. Is checking the error codes on the VT the same as the VS? From memory it was bridging pins 5 and 6 on the OBDII connector under the steering wheel?
I had a quick flick through the articles section here and there seems to be heaps fewer error codes for the VT than the VS, and there is no specific code for a crank angle sensor failure for the VT, whereas there is for the VS.
Any info appreciated!
Cheers
A mate at work is having trouble with his VT V6 exec, its been stalling a few times in peak hour traffic, I suspect that the good old crank angle sensor will be at fault, just as it was with my VS a number of years back. Is checking the error codes on the VT the same as the VS? From memory it was bridging pins 5 and 6 on the OBDII connector under the steering wheel?
I had a quick flick through the articles section here and there seems to be heaps fewer error codes for the VT than the VS, and there is no specific code for a crank angle sensor failure for the VT, whereas there is for the VS.
Any info appreciated!
Cheers