Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Checking Error codes on VT V6 exec

Harvs82

Active Member
Joined
Dec 29, 2005
Messages
1,134
Reaction score
24
Points
38
Age
41
Location
Glen Waverley VIC
Members Ride
MY08 Subaru Liberty GT-B & MY16 VF II SS Redline
Hi All,

A mate at work is having trouble with his VT V6 exec, its been stalling a few times in peak hour traffic, I suspect that the good old crank angle sensor will be at fault, just as it was with my VS a number of years back. Is checking the error codes on the VT the same as the VS? From memory it was bridging pins 5 and 6 on the OBDII connector under the steering wheel?

I had a quick flick through the articles section here and there seems to be heaps fewer error codes for the VT than the VS, and there is no specific code for a crank angle sensor failure for the VT, whereas there is for the VS.

Any info appreciated!

Cheers
 

danja

Swerves for gay koalas
Joined
Jan 26, 2006
Messages
1,786
Reaction score
56
Points
48
Location
Sydney
Members Ride
CBF 250 and a Levin ZR
Yep, pin 5/6 should do it.

My manual doesn't mention CAS, but does say code 48 is the Camshaft Position Sensor, which may be the same thing? Also says that particular code doesn't trigger the check engine light.
 

alien

Member
Joined
Nov 5, 2008
Messages
915
Reaction score
19
Points
18
Location
Tullamarine, Vic
Members Ride
03 VY Supercharged 3.8L
Code 48 for Camshaft Position Sensor! On VTs - VYs.

And yes, bridge pins 5 and 6.

EDIT: Grr at danja! I was busy chatting LOL! Got in just before me!
 
Top