Step 1. Take off air intake guard.
Step 2. Undo bolt connecting the MAF sensor to the Air intake to the engine. Disconect MAF wires.
Step 3. Undo Air box cover, 3 screws. Put a rag in the pipe coming out of the engine to stop crap getting into the engine. Replace Air filter and clean bugs out of the bottom of the air box.
Step 4. Clean the MAF senor and connection with CRC MAF sensor Cleaner. Do not touch the MAF senosr at all other wise you will be up for a new one. It will dry in a few minutes by itself.
Step 5. Put everything back together. Make sure you have a good seal between the engine air intake pipe and the MAF sensor pipe.
After doing my sv6 i notice it to run and drive a lot smoother. Will be doing it every service from now on.
Enjoy
Step 2. Undo bolt connecting the MAF sensor to the Air intake to the engine. Disconect MAF wires.
Step 3. Undo Air box cover, 3 screws. Put a rag in the pipe coming out of the engine to stop crap getting into the engine. Replace Air filter and clean bugs out of the bottom of the air box.
Step 4. Clean the MAF senor and connection with CRC MAF sensor Cleaner. Do not touch the MAF senosr at all other wise you will be up for a new one. It will dry in a few minutes by itself.
Step 5. Put everything back together. Make sure you have a good seal between the engine air intake pipe and the MAF sensor pipe.
After doing my sv6 i notice it to run and drive a lot smoother. Will be doing it every service from now on.
Enjoy