Climate Control - Air Mix Door

[mickVS84]

Good to hear that you got it back in mate, and yes that air con gas is very poisonous i found that out when i worked for toyota.

 

[VS_Pete]

Anybody else had this?
I got the blower fixed a while ago they got it out without taking the dash out.
It`s got no heat.
The heater core and hoses past the heater tap are hot.
I`m hoping they may have disconnected a vacumm hose everything else is working vents up/down windscreen.
The block under the radio was replaced a while ago.
Cheers Pete.
PS. I`ll take it back to the guys who did the blower.
Have to have a look too.

 

[Wozza]

Climate control or exec level control?
If exec there is a metal rod that can be misaligned or pop off completely..with the knob over on heat the white lever should be pushing up against a black button....if climate control nfi sorry.....Doh!!!! just read the old orig heading its climate control .....ignore the above....

 

[VS_Pete]

Anybody else had this?
I got the blower fixed a while ago they got it out without taking the dash out.
It`s got no heat.
The heater core and hoses past the heater tap are hot.
I`m hoping they may have disconnected a vacumm hose everything else is working vents up/down windscreen.
The block under the radio was replaced a while ago.
Cheers Pete.
PS. I`ll take it back to the guys who did the blower.
Have to have a look too.

The VS is gone in will update

 

[losh1971]

The VS is gone in will update

Great, like to here what the prob is. I still have a luke warm heater once I engage the compressor even with heat turned to full. Yet it's hot without the compressor on. Been wanting to get it looked at but not wanting to spend coin on the boring stuff right now, lol.

 

[VS_Pete]

mybe your heater door is not open all the way.
(Climate control or exec level control?)

 

[losh1971]

Exec Pete.

 

[VS_Pete]

Climate control or exec level control?
If exec there is a metal rod that can be misaligned or pop off completely..with the knob over on heat the white lever should be pushing up against a black button....if climate control nfi sorry.....Doh!!!! just read the old orig heading its climate control .....ignore the above....

Try this mate.

 

[VS_Pete]

The heater door motor (Motor - air mix) second hand was put in all good we have heat.
I have to scan diagram and put up. WIP.

 

[losh1971]

What did the slug you Pete if you don't mind, even hours taken would do. Gives me a rough idea. My actuator rod is in tact and is pushing on the white button too. I think there must be a flap inside that covers the evap when the heater is turned to hot and that it is possibly not closing tight enough.
I could use a new core as you can smell coolant when its turned on for the first time each day. But its not bad enough to spend the 150 bucks plus an hour or two labor to have it fitted. That is if he agrees to fit it the quick and easy way.