Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

code P0001 can any-one help with this car won:t start

Tonner Matt

Well-Known Member
Joined
May 12, 2014
Messages
1,793
Reaction score
2,171
Points
113
Location
Darwin
Members Ride
VZ 1 Tonner LS1 M6
The info I found for this code is:
It relates to the electrical system as part of the fuel volume regulator system
High pressure fuel pumps have a low pressure side and high pressure side, and a fuel volume regulator which controls the pressure
P0001 refers to an electrical reading that is "open"

Potential causes of this code:
Failed fuel volume regulator (FVR) solenoid
Fuel Volume Regulator wiring/harness electrical problem (wiring short, corrosion, etc.)
 

Daniel Souza

Active Member
Joined
Jan 7, 2017
Messages
222
Reaction score
133
Points
43
Age
43
Location
Glenwood
Members Ride
VF2 Wagon SSV Redline
The tool you used probably can ready the fuel pressure . Have a look if you have any pressure when ignition key is in first Position.

If there is pressure but below specs the issue could be the regulator.

If there is no pressure at all:
Check the Fuel pump fuse and relay.
You might be lucky and fine a relay of the same type to swap around for troubleshooting.

Which model is it?
 

dandjmj

New Member
Joined
Dec 13, 2012
Messages
8
Reaction score
0
Points
1
Location
samford
Members Ride
08 ve ss
The info I found for this code is:
It relates to the electrical system as part of the fuel volume regulator system
High pressure fuel pumps have a low pressure side and high pressure side, and a fuel volume regulator which controls the pressure
P0001 refers to an electrical reading that is "open"

Potential causes of this code:
Failed fuel volume regulator (FVR) solenoid
Fuel Volume Regulator wiring/harness electrical problem (wiring short, corrosion, etc.)
thanks for that info but can you tell me where the fuel regulator is on a VE SS V8
 

dandjmj

New Member
Joined
Dec 13, 2012
Messages
8
Reaction score
0
Points
1
Location
samford
Members Ride
08 ve ss
The tool you used probably can ready the fuel pressure . Have a look if you have any pressure when ignition key is in first Position.

If there is pressure but below specs the issue could be the regulator.

If there is no pressure at all:
Check the Fuel pump fuse and relay.
You might be lucky and fine a relay of the same type to swap around for troubleshooting.

Which model is it?
tis a 08 VE SS V8 where is the relay?thanks for that.
 
Top