ey guys changed over my ignition leads today, but car is not starting now. Im guessing the leads are in the wrong jacks? is there a diagram of some sort to indicate which go were.. also out side of car it smells of fuel when trying to start.
Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.
Coil pack problems
- Thread starter Noy
- Start date
Morton
For external use only
- Joined
- May 20, 2006
- Messages
- 4,097
- Reaction score
- 84
- Points
- 0
- Age
- 36
- Location
- Melbourne
- Members Ride
- Fairstar the Funship
It's possible that you
a) knocked a wire out of the coil
2) unplugged the HES
c) have it wired up all silly
iv) havn't put something else back where it belongs
The correct firing order is: 1-2-7-8-4-5-6-3
The top right plug on the dizzy cap should be #1, and you can work around from there. The cylinder numbers are cast into your inlet manifold behind the injectors.
a) knocked a wire out of the coil
2) unplugged the HES
c) have it wired up all silly
iv) havn't put something else back where it belongs
The correct firing order is: 1-2-7-8-4-5-6-3
The top right plug on the dizzy cap should be #1, and you can work around from there. The cylinder numbers are cast into your inlet manifold behind the injectors.
Vt-Brrrlina
vp bt1 gts replica
- Joined
- May 2, 2006
- Messages
- 521
- Reaction score
- 4
- Points
- 0
- Location
- Perth, Western Aust
- Members Ride
- vp bt1 5.0ltr full GTS kit
