Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

cold air intake question

vxs93

Member
Joined
Nov 20, 2012
Messages
133
Reaction score
0
Points
16
Location
melbourne
Members Ride
2002 VX s-pac manual
hey everyone i was looking at the ss inductions growler air intake for my vx v6. just looking for some feedback on them as they are pretty expensive.
would be good to hear from someone that has one.
feel free to post all your thoughts and opinions.
 

mr calais 5.0

New Member
Joined
Jun 7, 2011
Messages
1,723
Reaction score
1
Points
0
Location
victoria
Members Ride
vy s 2003
There is the 2 hole mod to the air box as well..
I know its a good hand full of money for a air intake..
 

Morton

For external use only
Joined
May 20, 2006
Messages
4,097
Reaction score
84
Points
0
Age
36
Location
Melbourne
Members Ride
Fairstar the Funship
Just run some flexible ducting down to that clean, fresh air.

Done. :)

HzfNMae.jpg
 

billy bob

Member
Joined
Nov 3, 2009
Messages
131
Reaction score
0
Points
18
Location
Canberra
Members Ride
VE S2 SV6
Best one is the Yella Terra.
Then replace your filter with a Lukey one
 

Dr HaxZaw

New Member
Joined
May 6, 2010
Messages
1,462
Reaction score
13
Points
0
Location
Sydney
Members Ride
R34 GT-T
As far as I'm aware the Yella Terra one only replaces the flexible hose not the factory airbox... and for that you can replace it yourself with some silicon hose from bursons for much cheaper
 

Pollushon

Boost gives me a bar....
Joined
Nov 9, 2012
Messages
3,744
Reaction score
2,844
Points
113
Location
Canberra
Members Ride
VY SS
As far as I'm aware the Yella Terra one only replaces the flexible hose not the factory airbox... and for that you can replace it yourself with some silicon hose from bursons for much cheaper

I spent $30 on eBay (Zenaracing) for 3.25 silicone and T-Clamps, then used some 3" alloy piping I had laying around to do exactly that on my first mod quest for smooth in/smooth out (as below). It also seems to have eliminated a heat soak issue I experienced twice heading up Clyde Mountain (which was entirely my own fault :)).

new_intake_2.jpg
 
Top