Commodore center bore height

[afracing]

Hey guys, is anyone knows the center bore height of Commodore VB VK VL VT VX VY VZ VU VS VR? And any other Holdens with a 69.5mm center bore. Tks

 

[vc commodore]

VB through to VZ have the same centre bore....The only exception there is the 4 cyl commodores....they have early holden PCD....Earlier holden PCD's a different, so you can't use any wheels from that era.

VE onwards wheels fit earlier Commodores, but the centre bore of the wheel needs machining out

 

[afracing]

Tks mate, I know there are some commodores have a 70.3mm center bore. But our problem is, you know the center bore ring, it is above the front face of the hub. Most of them are 10mm high, but some are 14mm, it is confusing, they are all commodores.

VB through to VZ have the same centre bore....The only exception there is the 4 cyl commodores....they have early holden PCD....Earlier holden PCD's a different, so you can't use any wheels from that era.

VE onwards wheels fit earlier Commodores, but the centre bore of the wheel needs machining out

 

[vc commodore]

Aftermarket wheels use hubrings...So what happens is suppliers supply various thickness hubrings to suit the wheel, so it has the interfearance fit new cars require

 

[afracing]

It's time to make some hubrings...Tks mate

Aftermarket wheels use hubrings...So what happens is suppliers supply various thickness hubrings to suit the wheel, so it has the interfearance fit new cars require