Commodore Height, how low can it go?

[TobyVS]

Hello everyone. Got a 95 VS Commodore with the live axle, currently with Ultra Low Kingsprings in rear. These are the lowest that Kingsprings offer for the live axle. Is there any other way of getting it to sit lower? Cheers
(Not interested in cutting springs)

 

[hademall]

Is there any other way of getting it to sit lower?

Take the wheels off.

 

[Dylan kingswood]

Cut them in half

 

[TobyVS]

Cut them in half

Not really looking to cut

 

[losh1971]

Obviously don't take the VS anywhere where there are speed humps?

 

[TobyVS]

Obviously don't take the VS anywhere where there are speed humps?

Clears bumps fine. Body just has stock skirts and bumper on so doesn't come down too far, exhaust very rarely scrapes on anything, but I can just take things on angles

 

[Login]

You can go as low as the authorities allow.

 

[Reg Sharpie]

you probably cant any lower and remain roadworthy ,you must retain 2/3 of the orginal suspention travel and 125mm from the lowest point to the ground, The roads must be good where you live . They have removed lots of speed humps in my town as a 4wd can drive over them at 100 then a lowered commodore cant go over them at 40.

 

[VYCommodore76]

just take the springs out and call her done

 

[figjam]

just take the springs out and call her done

Then put in airbags.
Turn off the ignition and it will sag to sitting on its guts. Way kool in the Maccas car park.
Then pump up to full 4WD height for the speed bumps on the way out of Maccas car park after a satisfying feed of imitation food.