Exidor
I come in peace.
- Joined
- May 7, 2008
- Messages
- 328
- Reaction score
- 1
- Points
- 0
- Location
- Earth. For now....
- Members Ride
- Used Martian spacecraft
My Aloytec is nearly due for a coolant change.
Can any body give me some pointers on this
procedure.
I am particularly interested in draining the block.
I know where the drain plugs are but what if any
problems will I encounter?
Are there replacable seals for the plugs, are the
knock sensors going to be a problem etc.?
Also what is the correct way to bleed air from
this particular motor.
Any feedback will be appreciated.:thumbsup:
Can any body give me some pointers on this
procedure.
I am particularly interested in draining the block.
I know where the drain plugs are but what if any
problems will I encounter?
Are there replacable seals for the plugs, are the
knock sensors going to be a problem etc.?
Also what is the correct way to bleed air from
this particular motor.
Any feedback will be appreciated.:thumbsup: