richrever
Member
- Joined
- Feb 18, 2017
- Messages
- 121
- Reaction score
- 18
- Points
- 18
- Age
- 57
- Location
- Perve Western Australia
- Members Ride
- Vs S2 V6 5,Speed Ute
Yet another abnormality.
I'm not sure if my v6 series 2 ecotech dip stick is correct for my engine? Or as likely the workshop Manuel is wrong.? 4Lt of oil to refill (inc filter) when doing an oil change. Correct ?.
So why does my dipstick register as being about 3/4Lt low? The length of the dipstick blade is 650mm the full mark is 75mm from the bottom but after draining replacing the oil filter and putting in 4Lt of oil and letting it settle to the sump oil level is only approximately 60mm up the stick? Part number on dipstick is 92063934. So three questions 1. Is the manual wrong? 2.is the dipstick wrong ? And 3. How far up the stick should the oil be?
Cheers Richrever.
I'm not sure if my v6 series 2 ecotech dip stick is correct for my engine? Or as likely the workshop Manuel is wrong.? 4Lt of oil to refill (inc filter) when doing an oil change. Correct ?.
So why does my dipstick register as being about 3/4Lt low? The length of the dipstick blade is 650mm the full mark is 75mm from the bottom but after draining replacing the oil filter and putting in 4Lt of oil and letting it settle to the sump oil level is only approximately 60mm up the stick? Part number on dipstick is 92063934. So three questions 1. Is the manual wrong? 2.is the dipstick wrong ? And 3. How far up the stick should the oil be?
Cheers Richrever.