Mattde
Member
- Joined
- Dec 9, 2010
- Messages
- 245
- Reaction score
- 12
- Points
- 18
- Location
- Milperra
- Members Ride
- VX Executive S1
So I have been spending the last few days suffering from exhaust that sounds like a tin can.
After removing the heat shields from my Cats (one of which came off after the most effortless wiggle) I have found another problem.
This:
Needless to say my muffler is kinda a bit stuffed.
Must have been a combination of old age and possibly scrapes.
So on to solutions:
- Find someone to weld it? (Not even sure if this is possible)
- Replace the whole part? (no idea what brand it is sadly and don't want to replace it with something that sounds like crap cos previously it actually sounded quite good!)
- Permatex Muffler & Tailpipe Putty? (But the crack might be too big?)
- Permatex Muffler & Tailpipe Bandage? (or maybe a combination of this AND putty?)
Any advice would be greatly appreciated.
NAAF maybe?
After removing the heat shields from my Cats (one of which came off after the most effortless wiggle) I have found another problem.
This:
Needless to say my muffler is kinda a bit stuffed.
Must have been a combination of old age and possibly scrapes.
So on to solutions:
- Find someone to weld it? (Not even sure if this is possible)
- Replace the whole part? (no idea what brand it is sadly and don't want to replace it with something that sounds like crap cos previously it actually sounded quite good!)
- Permatex Muffler & Tailpipe Putty? (But the crack might be too big?)
- Permatex Muffler & Tailpipe Bandage? (or maybe a combination of this AND putty?)
Any advice would be greatly appreciated.
NAAF maybe?