Crane Cam help needed

[atomicSS]

hi there guys i need some help with a cam that i have bought from a guy for $100 brand new in box.
the number i have found is 883931 which leads me to believe its a hydraulic cam. the questions are as follows
1. What are the best lifters to go with the cam?
2. Do i need to raise the comp?
3. Whats the best way to raise comp if need be?
4. What else do i need to do for the cam to work propperly
i already have the exhaust and i am working on the cai i m fairly fresh when it comes to modifying so any help would be great thanks
Paul

 

[BowTie]

I would use comp cams 875-12 lifters.

You can raise the comp with cometic head gaskets or have the heads shaved.

Get a double row timing chain, stronger pushrods and stronger valve springs.

You should also get a cam install gasket kit and a vrs gasket kit.

 

[atomicSS]

do you know the rough cost of this as i am working to bout a 1k budget

 

[atomicSS]

did i mention its to go in a VR SS 5.0L

 

[BowTie]

The 875's are for the v6. I'll look up the 308 part#.

You would do this easily under a 1k.

 

[atomicSS]

how far off 300hp would i be??

 

[wez84]

Have a look on the crane web site that will tell you a lot

 

[wez84]

883931 "H268" 206 206 112 448 448 1500–4000RPM HYD
Its only a very small cam, To go on the cheap i wouldnt worry bout the lifters standard will do
but 99284-16 Is the anti pump up lifter part number
comp of the engine will be fine.
this cam is not much more then standard more of a towing cam.

 

[atomicSS]

oh really so was a waste of a $100?? damnit haha

 

[atomicSS]

will it still sound better? lumpier or do i need to go a bigger cam for that