crate engines

[levymetal]

hay boys creat motors are graet i just got v6 stage 6 sre engine for my vp form over east it cost me $7000 including shipping perth wa (got it of ebay). i have for 3 months.the engine is good for 215kw.theres some photo on page.

that's really impressive, you got a dyno sheet i can look at?

 

[rob drag racer]

stage 6

stage 6 that i have to see do you have the parts list for the build

 

[Pub247]

Stages are the worst terminology used in performance vehicles ever. I'd prefer it people said things like rocket covers and platnium chambers

 

[rob drag racer]

im just interested seeing the v6 has limited legs when it comes to power from build

ok i just went to the page and they have a 200kw and a 165 kw and thats it thats only a stage 2 and 3 what else did you have done to yours scouser king ?

 

[scouser king]

hay buddy nothing to motor yet (got a capa superchager kit going in month or 2). i have just pacemaker extractors and a single 2half inch mild steel exhaust,planning a 3inch steanless when i get the superchager.oh sorry tuk the rev limter off and turn up the lidle speed 2 1300rpm.

 

[TrikkBen]

hrmmmm....

 

[scouser king]

ok sorry my terminology used in performance vehicles is poor i have had a few beers.
so here the spec list that come with the motor

1 X FULLY RECONDITIONED LONG ENGINE .
REBORED AND HONED TO PERFORMANCE TOLERANCES.
CRANK GROUND AND LINISHED.BLOCK HOT TANKED,DECKED ,NEW WELSH PLUGS, BLUEPRINTED
HEADS FULLY RECONDITIONED ,NEW VALVES ,BRONZE GUIDES,3 ANGLE VALVE GRIND, BACK CUT VALVES,BOWL PORTED AND FLOWED.
SUPPY AND FIT NEW CAM BEARINGS.
1 X SET ACL PERFORMANCE PISTONS AND RINGS.9.5 :1 COMP
1 X SET ACL MAIN AND CONROD BEARINGS.
1 x Clive Roller 228 @50 Hydraulic Cam 3200 to 6700 rpm.
1 X SET OF PERFORMANCE VALVE SPRINGS AND RETAINERS .
2x Performance 70 mm throttle body c/o.
1x Performance chip to suit cam listed c/o.
1x Rollmaster Red timing chain and gears SINGLE ROW
2 x Hydraulic lifters( NEW ! NOT RECO)
1 x FULL GASKET SET
1 X SET YELLA TERRA ROLLERS STD RATIO.
1 X 3500 STALL CONVERTER TO SUIT T700.
1 X TWIN THROTTLE BODY MANIFOLD AS SHOWN.
6 x GROUP A INJECTORS CHEMICALLY CLEANED ETC
and sorry for me poor spelling =0

 

[scouser king]

no sorry rob iam in middle of ripping it out to put in vp berlina due my car rusting out around the back windows

 

[rob drag racer]

i didn't meen any disrespect at all i was just wondering what extra had been done to it and what it go like is it worth the cash ? :thumbsup:

 

[scouser king]

thats ok rob iam easy going guy.it goes great (needs fine tune runin a rich)gives the old 5lts a good run and i have been hold by my local performance shop it could 13sec pass at the quater mile.this just the start for me =)