Cruise control install

[joebloggs]

Can anyone tell me where the cruise control loom on an exec goes through the firewall? I've managed to cut out the cruise loom out of a calais, but am unsure where it goes through.

Thanks in advance :hit:

 

[stackner]

hmy: hmy:

 

[sharpeidog]

Can anyone tell me where the cruise control loom on an exec goes through the firewall? I've managed to cut out the cruise loom out of a calais, but am unsure where it goes through.

Thanks in advance :hit:

Need to drill a hole yourself.... Put it through around about where the throttle cable comes thru....

 

[BillK]

Joe ,
See attached pages for wiring.
On the SS I am familiar with the Cruise control wiring is part of the main wiring loom that comes out thru the bulkhead in front of the driver and goes forward , across the front and back towards the passenger on the LHS.
When not used in the vehicle and loom has the facility it is taped back.
See 12N-37 where this is mentioned.
These pics are of the VP but I checked the VN Vol 7 and they are the same it's just that I don't have the electronic version of the pages for the VN.
Hope this helps.

 

[joebloggs]

My problem was that I was unsure if a hole already existed (I couldn't find one), if not, where i had to go through the firewall.

Thanks to everyone who replied.

 

[markovr]

The dealer fitted kit required a hole to be drilled through the firewall