Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Damos VX white now on chrome 19s

damoscommodore

New Member
Joined
May 27, 2011
Messages
89
Reaction score
0
Points
0
Location
Mandurah
Members Ride
Commodore
hey fellas just thought id do a thread on my car again , no photoshop this time
from start to finish mods all the way through the thread

Mods so far :
Vx rear garnish
New vx tail lights
re trimmed all four doors with black swade
L.E.D boot lighting
Feet L.E.D boot lighting
re carpted whole floor + boot two tone carpet
Mdf sides off boot for boot install
Black protection door strips taken off replace with chrome
chrome window trim
Legal tint
VY door handles and vents

In process mods:
Blue dash light conversion in process
DIY SS headlights in the process
Voltage/oil/temp gauges , bought but not installed
Painting hubs and caliper

Stero:
JVC double din head unit
2x 1300 watt sony explodes
2 x alpine mono block 750 watts 1x sony explode 750 watt
2x sony explode 170 watt 6x9s
tweeters in glove box
Updated Clarion door speakers from crappy factory

Exteroir
19 inch Zenetti design wheels chrome- multifited due to not fitting my car at first
chrome grill
Lower kit bought " no name brand " new stuts chock obsorbers and springs included

future mods:
airbags
Leather seating
Big boot install
Woodgrian dash

More photos uploaded later:lock:
4090a94_20.jpegSL370079.jpgSL370067.jpg-.jpg
 
Last edited:

Killr6

tutut
Joined
Sep 14, 2010
Messages
1,033
Reaction score
3
Points
38
Location
Hervey Bay QLD
Members Ride
BA XR6T
nice car man sits so nice.

but with your future mods, dont worry about gauges lol, they are pointless with a stock engine...and wood grain is horrible.
 

damoscommodore

New Member
Joined
May 27, 2011
Messages
89
Reaction score
0
Points
0
Location
Mandurah
Members Ride
Commodore
nice car man sits so nice.
but with your future mods, dont worry about gauges lol, they are pointless with a stock engine...and wood grain is horrible.

cheers man and the gauges were my mates he bought them then didn't wont them so i bought all three for $20
i was just going to get them under the head unit basically just for looks haha , so all my blue dash lights and feet lighting will match the gauges when lit up.
Yeah the woodgrain im humming and haring about not to fussed on it , just bought meself for a sticker sayin "fat chicks make my car scrape" just for a laugh haha
 
Last edited:

ucwepn

America just kicked in yo
Joined
May 19, 2005
Messages
2,472
Reaction score
17
Points
38
Location
Melbourne
Website
www.darkcold.com
Members Ride
WH statesman 5.7
Its a VT yer? nice looking car very clean and tidy, lose the mudflaps will look better.
 

damoscommodore

New Member
Joined
May 27, 2011
Messages
89
Reaction score
0
Points
0
Location
Mandurah
Members Ride
Commodore
Its a VT yer? nice looking car very clean and tidy, lose the mudflaps will look better.

cheers man , yeah its a vt , just changed the back end from vt to vx. I took the mudflaps off the other week drove once with them off and when i came back there was **** all up the side of me car mud and stuff from the rain . Being a white car it shows just about everything so i think ill keep them on
 
Last edited:

damoscommodore

New Member
Joined
May 27, 2011
Messages
89
Reaction score
0
Points
0
Location
Mandurah
Members Ride
Commodore
Sold my front springs to a mate who needed them now my car sits cr*&*p .So now im on the hunt to buy a whole new set front and rear SSLs , and scored myself a swap for calais garnish with chrome garnish strip for vx garnish , barginnnnnnn!

 
Last edited:

Killr6

tutut
Joined
Sep 14, 2010
Messages
1,033
Reaction score
3
Points
38
Location
Hervey Bay QLD
Members Ride
BA XR6T
hey mate here are those pics of that dash thing you were chasing.

Heres a progress shot
100_0364.jpg


putting it upto the light you can see where i still need to sand green off and where i have sanded.
100_0365.jpg


and mate all finished
100_0366.jpg
 
Top