Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Dash Tweeter Replacement VX

boardyboy

New Member
Joined
Mar 29, 2005
Messages
9
Reaction score
0
Points
0
Age
44
I'm having problems getting to the tweeters in the dash of a VX.

I've opened the door and removed the heater vent on the side of the dash (3 screws - 2 visible and one hidden in the triangular section). I've removed the screw holding the trim that is over the tweeters and windscreen demister vents. How do I actually get the trim out though? Is there more than one screw holding it?

Cheers
 
Last edited:
B

bdcmedia

Guest
Hopefully if its the same as the VY/VZ they are just clipped in so you just need to gently pull them out towards you!

Brett
 

deserthead

Well-Known Member
Joined
Oct 20, 2004
Messages
1,084
Reaction score
74
Points
48
Location
Cairns QLD
Members Ride
VS III l67 Column Shift Ute
Dash tweeters

Yep, they're the same! Just gently pullem up.
The tweeters r then just screwed down.
 

Tasmaniak

Not a valid input....
Joined
Apr 30, 2005
Messages
8,094
Reaction score
131
Points
63
Age
41
Location
S.E. Melbourne
Website
www.ranjinstallations.com.au
Members Ride
VR Stato, C180 Kompressor, Prado and Ka
Lift up about 20 degrees and then pull to the outside of the car.

One screw holds the tweeter in place, screw the new tweeter in place and bend the bracket to the angle you want and your all done!
 
S

Spyder

Guest
So there are no screws holding down the trim panel?? only clips?
 

boardyboy

New Member
Joined
Mar 29, 2005
Messages
9
Reaction score
0
Points
0
Age
44
Only the one screw in that piece of trim and 3 or 4 clips. Read above to find how to remove screw.
 
Top