Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.
Yes. Agreed.As it melted wiring in the loom the fuse must be too big. Fuses protect cables if the cable is rated at 20 amp it should be protected by a 20 amp fuse to state the obvious.
Add a small fuse while your rewiring or check its feed off the right side of the fuse in the fuse box .
The proximity of that harness to the fan is making me nervous.Right. Finished tidying up the wiring for the second time.
View attachment 230033
Book that plane ticket Fu.....
Once the radiator panel goes in it gets secured neatly across the top of that.The proximity of that harness to the fan is making me nervous.
How's this matey:The proximity of that harness to the fan is making me nervous.
Whats all that stuff on the radiator core? Its not going to block the air flow is it?How's this matey:
View attachment 230068
Got all the front end panel to panel and panel to chassis finger tight and alignment okay.
View attachment 230069
Starting to look like the end is near (hopefully)
Not at all.Whats all that stuff on the radiator core? Its not going to block the air flow is it?