Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Door card removal

Discussion in 'VF Holden Commodore (2013 - 2017)' started by Davison, Apr 1, 2014.

  1. Davison

    Davison Active Member

    Messages:
    224
    Likes Received:
    31
    Trophy Points:
    28
    Joined:
    Oct 31, 2013
    Location:
    Sideways
    Members Ride:
    MY16
    Trying to remove my front passenger door card, has anyone done this or have instructions?

    Cheers
     
  2. duaned

    duaned Active Member

    Messages:
    491
    Likes Received:
    188
    Trophy Points:
    43
    Joined:
    Dec 1, 2013
    Location:
    Newcastle NSW
    Members Ride:
    M6 Red Hot MSE
    Yes I did it recently. It's not hard to do. Lets see how my memory is.
    1/ Undo the 2 screws at the bottom of the door trim.
    2/ Remove the rubber insert located inside the pull handle (electric window switches) and then remove the screw. Remove the switches by locating the square opening in the switch frame and pull upwards to release the switch trim.
    3/ Remove the plastic cover located behind the door opener handle, then remove the screw.
    4/ Remove the boot opener button and trim by pulling the trim upwards at the rear.
    5/ Then remove the door trim. The clips at the top of the door trim sit horizontally so instead of lifting the door trim once the bottom has been pulled free, you simply pull toward you.
    Installation is the reverse.
     
  3. Davison

    Davison Active Member

    Messages:
    224
    Likes Received:
    31
    Trophy Points:
    28
    Joined:
    Oct 31, 2013
    Location:
    Sideways
    Members Ride:
    MY16
    Thanks Duaned, you're a legend!
     

Share This Page