H
harrop.senator
Guest
I'm at a bit of a loss here. I'm going to try crank angle sensor I'm thinking and then build another harness if no ones got some ideas. I did all the swap over diagnostics then got a mate over with a solus.
I've got no Cam angle code coming up Cam has been reground. Could bad machining create an issue with the hall effects sensor?
I'm waiting for him to bring the 15ft multimetre home to check continuity from plug to pcm pin.
I'm dropping drivers bank spark It's erratic passengers is clean.
I've changed the Cam angle sensor
I've changed pcm
Dfi plate and coilpacks and millimetre tested them.
Changed leads and plugs.
Change All injectors from running engine
Changed filter
Filled fuel with fresh 98 and booster
Wanting to find a stock vy l67 memcal and link it to see if it's my vats free manual memcal.
Anyone have any ideas?
I've got no Cam angle code coming up Cam has been reground. Could bad machining create an issue with the hall effects sensor?
I'm waiting for him to bring the 15ft multimetre home to check continuity from plug to pcm pin.
I'm dropping drivers bank spark It's erratic passengers is clean.
I've changed the Cam angle sensor
I've changed pcm
Dfi plate and coilpacks and millimetre tested them.
Changed leads and plugs.
Change All injectors from running engine
Changed filter
Filled fuel with fresh 98 and booster
Wanting to find a stock vy l67 memcal and link it to see if it's my vats free manual memcal.
Anyone have any ideas?