Ecotecing VR help

[JGlinatsis]

Hey all I'm am striping my VR auto and doing a full ecotec swap
now I have the general idea on how to do it, I'm getting all the stuff before I start
I have a VS statesman body Loom and the door looms
still looking for a motor and a auto if anyone knows of one
what else will I need and I have most of a vr if anyone is looking for parts
including genie extractors and y-pipe
70mm throttle body
motor box looms ecu with worked chip bcm
bumpers front and back
soon the dash and interior
and most of the engine bay
so let me know what I am missing and let me know if you want or need anything from the car

 

[fonzo]

Want an auto? its a vt/vx auto i had it in my vs. i did a manual conversion. i keep tripping over the box......id prob let it go for quite a nice price casue its annoying plugged straight into my vs loom. the box is so much better than the vs box....

 

[JGlinatsis]

ya I'm looking for everything auto would be a helpful were abouts are you?
and how much were you looking for it?

 

[fonzo]

Shepp. bout hour and a half from western suburbs. As for how much. prob about $300. its done f/a work doesnt have dipstick tube though. and has a small bit about 100mm long by about 50 mm wide cut from bellhousinto fit around the vs exaust